Chào mừng bạn đến với GTA5-Mods.com

@DevinKan LMOA, thats an entirely different high-riser, you are using a Mcdermott, which is white. and you also left out the credits for it. Also, the point of the high-riser is that it can be lifter up and down. whereas you have it permanently mounted up, which is really impractical. In addition, you copied the L0 to the L1, and thats where u stopped for lods, so the car will be gone when ur 15 feet away from it. Just copying the L0 to the other lods is also really bad, especially when the model is over 400k polys,(it should never be over 200, 250k max). There are several parts either missing for not placed well. The radar antenna majorly clips through the front windshield, the inner edge glass is missing, the module for the rear dominator is missing. In addition to all the above, the vertex? (im not sure what it is, but its not credited either) is way over-sized and its emis is attached to the rest of the lights, when u are able to have them separate, so when u open the door, the emis comes along with the door instead of floating mid-air. The grill is also a real mess, looks like you copied one piece and sloppily made it fit. Last but not least, on the setina rambar, the mapping for where there would be modules is messed up, and you have distorted red and blue in it. There are also several things wrong with the caprice itself, but thats not on you. All is all it looks like you put in some effort, but not alot. most of the problems could be fixed by putting in just a few more minutes or seconds of effort.

@wlupoli what prime is saying is, the actual author is 0taku not devinkan. and the model was already converted to gta 5, so idk what devin did, besides messing up some materials.

"-Vehicle Glass Does NOT BREAK. Default material shader was missing when I tried to export the file. I'll try and troubleshoot it and see if I can possibly fix it so that I can export the low lods correctly with breakable glass. "

to fix that, select all your materials and double click Shader material in the materials browser
https://i.gyazo.com/1fcc5db172358351f9a53975adc71666.png

@b4good ok so i should have a problem if i move the bodyshell, doors,boot etc (besides the handles il redo that)

@b4good ^

if i may ask what/where are the minor detail improvements? because ive templated the 2.0 version, and want to know if i can just transfer the templated parts over to the new version

@MrPrime i may, eventually

@Xenius i have it forced to the silver color to be realistic to the show. if you want a version where you can change the colors donwload it here.http://www.lcpdfr.com/files/file/11734-hawaii-five-0-dannys-camaro/

@smokey8808 slicktop looks nice but they dont use the soundoff signal predator.

it would be nice to have a video in the future but still looks good!